Which Tool to Buy for Disconnecting Di Fuel Lines??

[TLH101]

Need to replace the fuel pump in a 951 Di. There are about 8-10 different tools and sizes for disconnecting the lines. Which one, and what size should I get?

 

[nhmort]

It's 5/16".

 

[tkarvelis]

Either of these kits will work.

http://www.harborfreight.com/4-piece-fuel-and-auto-trans-line-disconnect-tool-set-96834.html

http://www.harborfreight.com/6-piece-fuel-line-and-a-c-quick-disconnect-tool-97576.html

You can also get them from most auto parts stores.

5/16 is correct. I believe it is red

 

[TLH101]

Picked up this set from O'Reily's today, and they work perfect, and easy to use.

 

[Mickirig1]

Harbor Freight has the Metric hex drives and nut drivers you need to work on ski's. Line pinches and lots of wire ties.

 

[TLH101]

Thanks, but I have all the tools I need to do most any work, just never had to work on fuel injection before. Was an outboard motor, and outdoor power equipment tech for the last 30 years.
And this little "burg" I live in don't gots no Harbor Freight.
This is my first F/I ski, my bike has a carb, and my car hasn't broken down...............yet.