water in hull

[tresvatos1]

I put my boat in the yesterday and there is a steady stream coming from the
black one way ball vavle located on the starboard side of the boat. Does anyone know what is causing this?

 

[timmyboy76]

that ball valve, is the valve, for the deck to drain. If its leak'n inside "engine", then its either the seal, or crack in the white corrugated tubing..?

 

[Cid6.7]

Scupper valve..I just replaced mine

Obviously the ball isnt doing its job & letting water in & prolly the line inside the hull is damaged..

 

[Nathan Mayo]

I just took my valve apart and fond it plugged open with acorns from not keeping the boat covered. That will let water in, but for it to enter bilge you must have a crack in the tubing from the cockpit back to the stern...........nm

 

[tresvatos1]

I actually looked harder and i think the water is coming in from around the exhuast seal on the drivers side just under the rear platform. Has anyone else run into something like this? How can i get this fixed? Thanks