Matt_martians
Member
Currently my vts isn't working. The output from the module is -6, 0, and 6v. I'm being led to believe that my module is bad and the voltage from the switch is going to the motor instead of the voltage from the battery. I havent tested the motor. I'm wondering if anyone sells an aftermarket one. All I see is used. I don't want to buy used, as that's a ticking time bomb for that used one to fail. I'm also looking into either repairing the circuit or reverse-engineering the circuit and making a PCB. I was wondering if anyone has manufactured their own VTS module, and how they went about doing it. Or has anyone repaired their module? Any tips on melting the epoxy to access the board? I'm just trying to see what my options are to get my VTS to work again
