The Trim Fix

[sgibson]

Hi All,

I need help with the VTS module on the 1997 sea doo GSX. I was wondering if "The trim fix" is a good solution to this I have read the forums and no one has pictures of it and it sounds like a lot of modding to do. So I am a bit skeptical, but I am handy just want to know if it will for sure work. Is there any way anyone can help me with this?

It is located on eBay I can't post a link since I am a new member...

Thanks,

Sean

 

[matempl]

I used the trim fix on my 95 xp. It works perfectly. Very easy to install. My unit had a good working motor and the gauge still functioned so I only needed the controller. I mounted it in the front of the hull on the foam.

 

[sgibson]

Hi Matempl,

Okay, that sounds good I'll get one on order. Were there any extra things you needed to buy such as connectors, wires, heat shrink, etc.?

Thanks,

Sean

 

[matempl]

Connectors and heat shrink

 

[sgibson]

Okay, thank you I will get that too.

 

[GGuillot]

Hi All,

I need help with the VTS module on the 1997 sea doo GSX. I was wondering if "The trim fix" is a good solution to this I have read the forums and no one has pictures of it and it sounds like a lot of modding to do. So I am a bit skeptical, but I am handy just want to know if it will for sure work. Is there any way anyone can help me with this?

It is located on eBay I can't post a link since I am a new member...

Thanks,

Sean

I've heard about this device, people on the FB seadoo 2 stroke forum are having good luck with it. I've been fortunate no issues with the stock setup on my 96' GSX. It works from what I understand, but what I'm trying to also understand is the cost/benefit, the Trim Fix runs about $100 and for about the same you can buy a good used setup off another ski.

Agree, lots of wiring modding to set it up, the ones I've seen on FB look like a wiring mess.

 

[sgibson]

Well, I think the benefit to this device is that you won't need to replace the VTS module when it does go out unfortunately for me when I plugged it in, it didn't work(also smoked a little bit because we figured it out that the VTS was shorted on the inside). Plus it is a new device that has never been used and it is all external.