Richard Kagen
New Member
Machine has 75 hours on it. Everything is as described. Life is too short to rip some one off for $100. So if you buy something that you are not happy with, I am sure we can work it out.
Everything is plus actual shipping cost (no handling charge). I prefer paypal for payments.
I am in Metro-West, just outside of Boston, MA.
If you move quickly I would be interested in an offer on the whole machine before i start pulling it apart.
I can get you information or pictures of anything
1. Pump , Complete, excellent condition including impeller. Complete rebuild never run: new bearings and seals , $ 400
2. Seats , Red - Front and Back very good condition , $ 400
3. Steering , Red - Complete with grips and pads. (no throttle or buttons) , $ 200
4. Intake and throttle , , $ 100
5. Exhaust , Complete with all hoses and clamps. Not including manifold , $ 150
6. Engine , Complete with manifold, head, filter, PTO, oil cooler, oil fill neck and cover, dip stick
Engine starts and runs, but coolant is mixing with the oil somewhere (head, oil cooler or cracked block) Good compression , $ 500
7. Electronics (MPEM & ECU) , Sensors staying with the part they are mounted to. Comes with 1 key , $ 600
8. Wiring harness , OEM connector to hood assembly is missing currently using aftermarket connector up in the very front of the machine , $ 250
9. Ride Plate , , $ 100
10. Seat brace/intake bridge (top and bottom) , , $ 100
11. Trailer , single, need tires , $ 350
12. Hull & hood , Missing corner trim, some wear on rubrails and front bumper. Hull number plates intact , $ 750
13. Glove box , , $ 100
14. Firewall , with extinguisher mount , $ 50
15. Air intake , , $ 75
16. Fuel tank , , $ 100
17. Fuel gauge , , $ 150
18. Injectors with bar , , $ 100
19. Coils (3) , , $ 80
20. Freshwater side , Coolant bottle and all hoses , $ 125
21. Starter , New aftermarket , $ 50
22. OPAS , complete , $ 75
23. Rear grab handle , has red/gold raised labels , $ 75
Everything is plus actual shipping cost (no handling charge). I prefer paypal for payments.
I am in Metro-West, just outside of Boston, MA.
If you move quickly I would be interested in an offer on the whole machine before i start pulling it apart.
I can get you information or pictures of anything
1. Pump , Complete, excellent condition including impeller. Complete rebuild never run: new bearings and seals , $ 400
2. Seats , Red - Front and Back very good condition , $ 400
3. Steering , Red - Complete with grips and pads. (no throttle or buttons) , $ 200
4. Intake and throttle , , $ 100
5. Exhaust , Complete with all hoses and clamps. Not including manifold , $ 150
6. Engine , Complete with manifold, head, filter, PTO, oil cooler, oil fill neck and cover, dip stick
Engine starts and runs, but coolant is mixing with the oil somewhere (head, oil cooler or cracked block) Good compression , $ 500
7. Electronics (MPEM & ECU) , Sensors staying with the part they are mounted to. Comes with 1 key , $ 600
8. Wiring harness , OEM connector to hood assembly is missing currently using aftermarket connector up in the very front of the machine , $ 250
9. Ride Plate , , $ 100
10. Seat brace/intake bridge (top and bottom) , , $ 100
11. Trailer , single, need tires , $ 350
12. Hull & hood , Missing corner trim, some wear on rubrails and front bumper. Hull number plates intact , $ 750
13. Glove box , , $ 100
14. Firewall , with extinguisher mount , $ 50
15. Air intake , , $ 75
16. Fuel tank , , $ 100
17. Fuel gauge , , $ 150
18. Injectors with bar , , $ 100
19. Coils (3) , , $ 80
20. Freshwater side , Coolant bottle and all hoses , $ 125
21. Starter , New aftermarket , $ 50
22. OPAS , complete , $ 75
23. Rear grab handle , has red/gold raised labels , $ 75