Jetski starting issue

[Wbelt]

Okay y’all I know this is a sea-doo forum but I need some help, I have a 2000 Kawasaki ultra 150, put brand new battery in turn it all on go to hit start and nothing happens. No noises or anything. I took a screwdriver and touch the solenoid posts, it turned over. My question is do y’all think it’s the start switch module, or what should I dig into.

 

[mikidymac]

Does it have any kind of security key or code?

 

[gazzaskirepair]

It should have a kill switch tether in the left hand handle bar same as an outboard engine

 

[Wbelt]

It has the key to turn on the electronics, (gas gauge an stuff) then the lanyard to the kill switch, I don’t see any codes on dash,


and I did have the kill switch deal connected.

 

[gazzaskirepair]

Did you check the fuses some machines had two in mounted in square orange boxes
I’ve worked on 250/269x and STX 15Fs but they shouldn’t be much different

 

[Wbelt]

I see that there’s a main and a trim, but you can’t really see them because the rubber is pretty dirty an stained. Is there a way to remove that rubber casing on them.

Also is there other fuses beside those too that I’m seeing?

 

[gazzaskirepair]

The contractor is bolted in between a casing

 

[Wbelt]

Contractor? Where’s that located?

 

[gazzaskirepair]

Follow the big red wire from the battery

 

[Wbelt]

Ok so I have the box that wire goes too that your talking about, what exactly am I looking for in it? I’m not seeing any other fuses anywhere. I did notice just now that the trim is going up and down when I push its buttons.

 

[Wbelt]

.