Dimples /bubbles

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

JTR

Member
So this is wierd. Summerized and cleaned my 2007 GTX 4-tecs. I noticed on the lower part of the footwell, just above well, for about 18", these small dimples on the surface, like bubbles. Try to push them out they dont move. Has the Gel coat been compromised? I never use hard chemicals to clean the hull. It is worse on one machine than the other. Nothing on the right side edge of the footwells on either machine. Jim
 
Status
Not open for further replies.
Back
Top