Any good Sea Doo Mechanics in the DFW area?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Robert Mooberry

New Member
It looks like the mixture on my starboard engine is running lean, the plugs have a tan ash on them. The engine wants to run at either 4000 rpm or 6000 rpm at speed and goes between the 2 erratically. It is not fun to steer while dooing this. Port engine seems to run fine, It might be a tad on the rich side. Anyone know of a good mechanic or shop in the Dallas Fort Worth area I could have check out this problem. My boat is the 1996 Speedster with twin 787's 1 carb per engine. I had the carbs rebuilt at Cowtown Power Sports approx 5 years ago. I'm not sure how often these need to be rebuilt.

I keep getting the year model mixed up. I actually have the 1997 year model.
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top