Okay, I'm really frustrated at this point. Compression is 120 on both cylinders. I have had the carbs rebuilt by the dealer, bypassed the fuel selector switch, replaced the bowl filter with an in line filter. The lines have been replaced with black by the previous owner. It revs wild at idle out of the water and in the water won't accelerate without giving it choke. Sounds like an air leak, right? I replaced the gaskets at the base of the carbs and used sealant. I replaced the o-ring at the intake manifold. I checked the rotary valve, and if I read the instructions correctly it is correct. I haven't got a fuel pressure gauge, but when I hold my finger over the intake hose it doesn't feel like I'm getting much pressure. I don't know what else to do. Would it hurt to put a cheap 12v in line fuel pump in front of the carbs?