• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

787 RFI Break In - Fuel / Oil Mix?

Status
Not open for further replies.

surpluseller

New Member
I just installed a new engine from SBT and I know the break in procedure calls for double oil (injection and mixed in the fuel) for the first ten gallons. I know that premix is not good for the injectors. Do I need to skip mixing oil in the tank because of the fuel injection?
 
Yes, DO NOT premix in any RFI or DI Seadoo. I would set the oil pump a little on the rich side from being aligned to get a little more oil in for the break in period then go back to aligned after the first tank of gas.
 
Status
Not open for further replies.
Back
Top