• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

4tech pump boot????

Status
Not open for further replies.

riverfox

Member
Okay guys I have a really dumb question. I have a 2003 seadoo GTX 4-tec supercharged. I have owned the ski for many years and change the impeller and wear ring a couple times and haven't put much thought into the extra two seals/bootd that solas provides with the impeller. Looking at my manual it references a number two and a number three Boot and ring that should go on the backside of the impeller where the motor driveshaft is. This appears to seal off water from getting in the splines of the driveshaft. is this necessary have I been doing it wrong my whole life and not putting one in? The first time I changed the impeller and wear ring there was not anything of the sort on the back side please see pictures.
 

Attachments

  • 15613302753166557159213153883473.jpg
    15613302753166557159213153883473.jpg
    3.3 MB · Views: 6
  • 15613303132535632515819700645380.jpg
    15613303132535632515819700645380.jpg
    3.7 MB · Views: 7
  • 15613303891016281433580179933794.jpg
    15613303891016281433580179933794.jpg
    2.7 MB · Views: 6
Status
Not open for further replies.
Back
Top