2009 GTX 4tec 155 dess electrical problem

[turk]

2009 GTX 4tec 155 no beeps when key applied. Worked when put away in fall. Battery is good connections good tried key and learning key but no go.
Need troubleshooting guidance

 

[amigo32]

You are assuming its a new Battery? Or you bought a brand new battery
and its still doing the same ? f so i would start by checking the main Relay
and 30 amp fuse , assuming you awake the unit up by pressing the start button
and you get the test cycle on the screen you may also hear some relay clicking
if no beeps you may have a bad dess key post

 

[turk]

30A fuse is good. battery tests good but not new Voltage is 12.45V. Nothing happens when pressing start button

 

[Digdog]

Try replacing the 30 amp relay in the fuse box

 

[turk]

Try replacing the 30 amp relay in the fuse box

It looks like it may be the relay. It has 12V on the coil but doesn't pull in. If I manually close it I get 2 beeps etc. Is that something to get from a Seadoo dealer? P/N?

 

[amigo32]

You can get that relay from your regular auto part store

 

[amigo32]

278002822 there is your relay part number​

 

[Digdog]

If you buy the relay from an auto parts store its way less money , you can test your old one by using a 9 volt battery and touching it on the 85 and 86 posts , it should make a distinct click .

 

[turk]

Thanks for all your help. Relay was the problem. I was able to buy one at the local Seadoo dealer for $12. I was surprised that it was that cheap since they tend to gouge us in Canada

 

[amigo32]

Im glad you got it running, and thank you for posting back and let us know
the people in this Forum are amazing !!!