-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
2006 RXP Guage Cluster.
- Thread starter dukhunt43
- Start date
- Status
mkov608
Active Member
I just replaced one on my ski; it cost me $602.00. Google search the part number as vendors change frequently. Yes clusters can be repaired, but the repair may be more expensive than a new one if water got inside the unit and shorted out the electronics. The tricky part is making them water tight once you have taken the cluster apart. From my experience, attempting repairs is not worth the effort.
I noticed that both of the new gauge clusters have a check valve on one of the four plugs that cover the four screws that hold the MB to the outer shell. I'm not sure how it works since there is a screw under the plug or if the cluster is under vacuum or pressure, and I'm not going to take that apart for sure!
One last thing, since you have an '06 ski, your cluster will need flashed, and married to the ECU (reference your shop manual). I think you can do that with a Can-Doo; give them a call. 1-218-422-6366
I noticed that both of the new gauge clusters have a check valve on one of the four plugs that cover the four screws that hold the MB to the outer shell. I'm not sure how it works since there is a screw under the plug or if the cluster is under vacuum or pressure, and I'm not going to take that apart for sure!
One last thing, since you have an '06 ski, your cluster will need flashed, and married to the ECU (reference your shop manual). I think you can do that with a Can-Doo; give them a call. 1-218-422-6366
- Status
