2000 Seadoo LRV pics needed

[Bornfree2021]

Hello Everyone,

I recently purchased a project 2000 Seadoo LRV. I need some help with missing items and routing of wires and hoses.

Such as:
Wiring harness from Number 1 connector on MPEM, the one i currently have, is not long enough, so a figured it is not for this model. Also, Compass module is missing.

RAVE Control module, wiring and hoses... All missing

It is an original carburetor version 951 engine.

I can not find a service manual for this model. I have located a parts book and operators manual thou.

I have attached a few pics for reference and can add more if needed.

Any help would be VERY much appreciated, THANK YOU...

 

[1of500]

Last pic vts housing

 

[Bornfree2021]

Last pic vts housing

Thank you, Much Appreciated, Another piece of the puzzle...

 

[Bornfree2021]

Last pic vts housing

Might you have the ability to take any pics of a Seadoo LRV or know anyone that can? Much Appreciated ;-)

 

[1of500]

Everything should be similar to a 951 gtx carb. The rave control solenoid has a line with a check valve that ties into the bottom of the crank case next to the pulse line. The cut zip ties are either where wires were routed or fuel lines

 

[Bornfree2021]

Everything should be similar to a 951 gtx carb. The rave control solenoid has a line with a check valve that ties into the bottom of the crank case next to the pulse line. The cut zip ties are either where wires were routed or fuel lines

Thank you, Appreciate any and all Help...