My oil injection tank recently fractured and broke. The machine overheated and shut down. I towede it in and put oil in and started back up after it had cooled. I later replaced the tank and oil filter. SINCE this happened I've NOW had several othewr problems I never had before. Plug Fouling occurs after about 20 mins in the water, and RPMs drop off before it dies. I NOW get a 12v low current warning on the LCD panel display, but the battery is good and starts right up with new plugs. The machine still has the old grey bhoses for oil lines I know I should replace them... PLEASE HELP! You guyhs have been SOOO great on this forum! Thanks in advance Tom P.
				
			 
	


 
 
		 
 
		 
 
		