jeffstumpf
New Member
Hi guys,
This is my first post and first Seadoo. I have included a short video, but here is what I have done first;
1. Removed plugs and inspected cylinders with a bore scope.
2. Cut the starter switch to bypass, jumping wires
3. Put 2-stroke oil in cylinders to lube
I am familiar with Kawasaaki's 650 and Yamaha's 701 engines, to give you a little background on my abilities. Here is what is happening I fully charged the battery to 12.9 volts, I jumped the starter wires and got a clunk, I am sure I just need to lube the cylinders and work back and forth the crank. How do you move the crank? I fail to see any holes to grab and move manually; the starter is trying to engage. The ski did run in 2020, and I get the two beeps when I put the key in.
Ok, here is the video! Thanks in advance.
New video · Monday, Sep 15
This is my first post and first Seadoo. I have included a short video, but here is what I have done first;
1. Removed plugs and inspected cylinders with a bore scope.
2. Cut the starter switch to bypass, jumping wires
3. Put 2-stroke oil in cylinders to lube
I am familiar with Kawasaaki's 650 and Yamaha's 701 engines, to give you a little background on my abilities. Here is what is happening I fully charged the battery to 12.9 volts, I jumped the starter wires and got a clunk, I am sure I just need to lube the cylinders and work back and forth the crank. How do you move the crank? I fail to see any holes to grab and move manually; the starter is trying to engage. The ski did run in 2020, and I get the two beeps when I put the key in.
Ok, here is the video! Thanks in advance.
New video · Monday, Sep 15
