Has anyone ever replaced the hinges on a 2010 speedster 150 with something different then the plastic seadoo ones?
if so what ones did you use and was there much modification involved to make them fit.
thanks
the deep cycle isn’t being used as the starting battery the stock battery that came with the boat is used as the starting battery, they deep cycle is the one used for the stereo and amp
Hey all,
To go along with studiocat’s thread I’ve pretty much done the exact same setup as he did except for its on a 2010 speedster 155 and I’ve used it the the last 7 months and got to say that I have not had an issue with it at all!! It’s a great setup if you were thinking about going this...
Hey Rick sorry for the very late reply but great to hear you went with the blue sea switch it’s what I would have recommended, as for my setup I’ve been running it hard this summer on the bay and in the lake and I haven’t had any issues with it at all!! The setup works great!! I did had a plug...
Hey DooGuy
The kit I went with for the 2010 seadoo speedster was the 65amp kit if I’m not mistaken it will charge when plugged in at 10 or 15 amps if you go to the bluesea site and look up 7655 you can find the manual there which has all the info
So the tray is mounted to the same holes that the original tray was into, here is a pick of the bottom of the tray I made, in the pic with just the green tray you can see the 8 original holes drilled
Hey Briancayko
I ended up adding a second battery to run a 1600watt amp with 2- 8.5” speakers 2-6.5” speakers and a 10” sub the rest is still ran off the starting battery. I have hooked up bluesea mini add a battery plus system for charging systems upto 65amps. It’s a nice setup up as it...
Hey 10forty2,
quick question I've been at the boat and hooking up that dual battery setup, can you remember how you wired the switch going from the stock switch to the blue sea one? I am seeing a red and black wire going to 1 post and another red wire going to the second post, just curious how...
Awesome thanks 10forty2, keep me posted if you proceed and I’ll let you know how I make out as well.....in the mean time have you ever removed the seats in yours? Curious because that’s what I’m about to do and wondering if there are any bolts that got to come off first
Tks