Search results

My new project 1996 GSX I purchased partially apart due to not running right and I have it all back together and found the source of the issue to be it is overcharging at 16+ volts. I installed a used voltage regulator and it is still overcharging and I am waiting for another one to arrive for...

I need new voltage regulator for a 1996 GSX I am putting back together, finally got it running but will not rev up at all. Found almost 16v at the battery, unplugged the red wire from the regulator and she runs great! Who sells a good one that will last, brand?

I am trying to access the manuals for my skis as I have many times before but now on both of my computers it tells me "it appears you don't have permission to access this page". Is this page no longer active?

Are the side rub rail insets on the 90's skis the same size and shape? I am looking for one piece of the rub rail insert for my 96 GSX and lots are listed in purple on ebay but none are the specific part number. I am thinking they are interchangeable but I don't have multiple skis here to...

I am working on a 1996 GSX that I purchased in pieces. The jet pump was installed with sealer to the hull. The part lookup doesn't show a hull to pump seal. Does it take rubber or neoprene seal, what part number should I look for if it does? Thx for any help.

I have purchased a Poppy cover and Seadoo cover for my 2006 GTX. Neither of them fit, too tight in the handle bar area and do not reach down the sides in the front. Has anyone ever ran into this issue. Is there something strange about this year it looks the same as all other 2002 - 2006 GTX...

What is the better cover Poppy cover or a factory Seadoo one? I have used Poppy covers on my old skis and have been happy with them but I can get a new Seadoo one for my new ski. Just wanted to see if anyone compared the 2 yet.

I am working on fixing a hard start when hot issue and fount my rotary valve clearance was at .016, max spec is .014 on my 1997 GTX. There were some marks on the valve and cover so I decided to order a new parts. I am using the OSD marine rotary valve that is .024 thick which is .001 more than...

On going for the last 2 years on my 1997 GTX I have been battling a hard start when hot, cranks and stalls multiple times and it is very sluggish at when taking off hard at lower RPM's. I parked it at the end of last year and its time to start trying to fix this issue again. Last spring carbs...

I bought a 2006 gtx s/c that did not start and the lady I bought it from said it has been doing this intermittently for a while but now will not crank. I diagnosed it as a bad relay, had 12v on 1 wire and ground on the other at the solenoid when pressing start button, 2 beeps with key on post...

I was going to have my impeller refurbished but it is destroyed so I am between a used stock one and a use Solas Concord sr-cd-12/20 that only comes with one nose cone. Is the SLA011A nose cone the proper one for a 2006 GTX supercharged 185 ski? Has anyone used this impeller on their ski and...

What is a good company to send an impeller out to get it refurbished if I can't find a good used one?

I'm looking to buy a good reliable 4 stroke for my daughter to replace my 1999 and 1996 Gtx skis. What should I be looking to purchase? I found a 2006 GTX close to me, good ski? Looking for more reliability for her, not top speed. Completely new to the 4 strokes know nothing about them all...

I purchased a 98 GTX that had been sitting for a couple of years not running, under 100 hrs on motor. Last fall I rebuilt the entire fuel system with factory kits, new lines, filter, and selector switch. Drained all old fuel out of the tank also. I had a chance to run it briefly once at the...

Asking for a friend who bought a project ski with no key. Does the 98 GS equipped with DESS?

Can anyone verify if this is the correct orifice that goes into the fuel line before the accelerator pump on a 1998 GTX. I purchased it off of ebay based on the part number search but it did not come in a seadoo part bag. I did not know it was in my old lines and threw it away.

I was changing the balance shaft oil in my 98 951 and did not find any oil in it when I put the syringe in it to change it. Where might it have leaked to? I am going to fill it back up with 40 ml of oil. Is it possible I am not reaching all the way in to get it out and should I be concerned...

I need to paint the rear grab bar black again on my 98 GTX, I tried to heat gun it but that didn't work. Is there a type of paint that works better for the plastic grab handle that won't chip and will hold up?

Just curious if anyone knows if there is anyone running sales on seat covers and traction mats this black Friday. I need them for my 98 GTX.

I just finished full rebuild of my fuel system and am going to prime it on my new 98 GTX. Is it ok to pull vacuum with my Mitivac hand pump connected to the return fitting on the carbs to pull gas through the system. I wasn't sure if applying vacuum to them was ok and will not hurt the...