Will This Sea Doo Manifold fit my XP?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Brad Ramirez

New Member
Hey Guys,

I have a 94 XP 657x SeaDoo that needs a new exhaust manifold.
The manifold I took out has Part #979141.

Im on my 3rd Ebay purchase of the damn thing and I keep getting screwed.
I ordered the 979141 manifold and just received a manifold that has # 697834.
It looks slightly shorter than what I pulled out but the seller says it will fit.

Will it fit? I wont be able to get to my Doo until Saturday.


Thanks Brothers!
 
Hi and welcome to the SeaDoo forum.

If you want to get the correct part at a fair price our unofficial/official parts supplier for the forum is Nick [MENTION=41828]Minnetonka4me[/MENTION].

Lou
 
They are pretty much all the same the big difference is the mounting holes for the pipe (sp vs spx and xp) and the later grey ones had a bigger stud and bolts on the top part.
 
The early 587's (yellow) had the smaller cooling "holes" in the mani too where the later white 587's shared the same as the 657's and 720's. Not sure if taht would make it run hotter or not.


Early 587 with 2 cooling holes versus the V ports on either side.
331.jpg
 
Hey Guys,

I ended up finding the manifold with the correct part number.
Wanted to avoid any potential problems.
Thanks for you help
 
Status
Not open for further replies.
Back
Top