Stuck Exhaust Manifold - 00 GTX RFI 787

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

fabs

New Member
I'm pulling the motor from my 2000 GTX RFI 787 and I've taken out 4 bolts around the exhaust manifold that go straight into the block. I don't see any others, are there some that I'm missing? I've also taken out 2 bolts from hangers that hold the end of the exhaust. If anyone has any tips to get it unstuck or if they know what bolts I may be forgetting please let me know. Thanks!
 
Still trying to get this exhaust off but no luck. Tried a chisel and hammer but didn’t do much. Hit it with a heat gun and just started burning the gasket. I’m gonna pull the drive shaft and everything behind the engine off so I don’t damage them. Pulling on the exhaust moves the entire motor and everything stuck to it. Any tips to get it off would be a huge help!
 

Attachments

  • image.jpg
    image.jpg
    329.9 KB · Views: 3
There are more than 4 for sure,,,get a mirror behind there,,,i think there are 8 in total,,,
 
Status
Not open for further replies.
Back
Top