Ski Locker gas piston replacement

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Nosnibor

Active Member
I am trying to figure out that size of the gas piston for the ski locker in the middle of the boat on a 2011 180 Challenger. Mine must of got some water in it and corroded really bad.

I actually pulled the bolt threw the boat material trying to open it so I have to do more than just replace the piston. Any ideas?
 
you could try posting some pics of the damage, that would help others to understand what you are talking about. Are you talking about the screws that go into the bracket in the door? you may be able to fill the holes with an epoxy or resin and then drill a pilot hole and use a larger screw to attach the bracket again
 
Search back a few years ago and you will find what place I used for new pistons. SPD is the company that makes them!
 
Status
Not open for further replies.
Back
Top