• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Removing Engine

Status
Not open for further replies.

BMX2FOUR7

New Member
I am removing the engine from my 93 XP. how do i un hook the white box right by the battery. It has the big black cord that plugs into the top. I unscrewed that crd thinking that it pulled out but if you unscrew it its obviously not a wire that comes right out. I was planning on leaving this white box whatever its called on the front of the engine when i pull it out if at all possible.
 
That may be the electrical box that slides between the gas tank a hull, yes?

If so, you will have to open it, (be careful not to snap off the tabs) then follow the wires (inside) that need to be disconnected.
 
Status
Not open for further replies.
Back
Top