Killertiller
New Member
Lmao, well obviously cans of worms dont scare u at all. Again awsome job , i goin to go check out your other build.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Rebuilding a XP 720 Motor
- Thread starter Guyph_01
- Start date
- Status
Hi Guys,
Well some of you may know i've bought a factory pipe for my 717 xp. Now i finally got all the jets and parts and need to tune it. I tried to see with the seadoo mech here if he can help me but he is completetly booked and can't. So i was hoping you guys could help me
Here is the page i started about it all
http://www.seadooforum.com/showthre...factory-pipe-rev-limiter-and-tuning-the-carbs
thx
Well some of you may know i've bought a factory pipe for my 717 xp. Now i finally got all the jets and parts and need to tune it. I tried to see with the seadoo mech here if he can help me but he is completetly booked and can't. So i was hoping you guys could help me
Here is the page i started about it all
http://www.seadooforum.com/showthre...factory-pipe-rev-limiter-and-tuning-the-carbs
thx
Hi guys,
So as some of you guys know from reading my other post, i had some drama this weekend with my ski. On the other hand i rode my other 720xp i just bought and it had a working vts. Man it was so fun trimming it up and jumping off the waves.... This makes me want to get mine working. Now, from the test i carried out following the steps for the repair manual, looks like its the vts module.
I when on ebay and came across this after market Vts unit. Anyone came across this and used it? is it any good? Seller wants $90 for it.
http://www.ebay.com/itm/Seadoo-VTS-..._Watercraft_Parts&hash=item35c3a0d9c8&vxp=mtr
I figured i'd rather buy $90 for a new unit than pay $90 for a second hand one. Only thing i'm not sure if they are reliable and work well.
Here are some pics of my new xp
Thx
So as some of you guys know from reading my other post, i had some drama this weekend with my ski. On the other hand i rode my other 720xp i just bought and it had a working vts. Man it was so fun trimming it up and jumping off the waves.... This makes me want to get mine working. Now, from the test i carried out following the steps for the repair manual, looks like its the vts module.
I when on ebay and came across this after market Vts unit. Anyone came across this and used it? is it any good? Seller wants $90 for it.
http://www.ebay.com/itm/Seadoo-VTS-..._Watercraft_Parts&hash=item35c3a0d9c8&vxp=mtr
I figured i'd rather buy $90 for a new unit than pay $90 for a second hand one. Only thing i'm not sure if they are reliable and work well.
Here are some pics of my new xp
Thx
Also, Is this a performance upgrade?
http://www.ebay.com/itm/Sea-Doo-199..._Watercraft_Parts&hash=item4844e84720&vxp=mtr
thx
http://www.ebay.com/itm/Sea-Doo-199..._Watercraft_Parts&hash=item4844e84720&vxp=mtr
thx
Hi guys,
As per my other thread about the factory exhaust install, now the only little thing i got to fix is the VTS.
Just wanted to find out your thoughts about the following vts system, if anyone has used it, and the reviews before i buy it or the std vts module...
here is the link again
http://www.ebay.com/itm/Seadoo-VTS-H...a0d9c8&vxp=mtr
thx
As per my other thread about the factory exhaust install, now the only little thing i got to fix is the VTS.
Just wanted to find out your thoughts about the following vts system, if anyone has used it, and the reviews before i buy it or the std vts module...
here is the link again
http://www.ebay.com/itm/Seadoo-VTS-H...a0d9c8&vxp=mtr
thx
Took the ski for a short run yesterday arvo and noticed the plugs where white. I've talked about it on the factory exhaust thread if you guys can have a look there and help so all the info about that stays on that post.
One the other hand i'm also having starter issues. When i press the starter i car here a slight grind noise and the starter turning but not the motor. Press a few times then the motor turned and we went for another blast. Came back turned it off and the same problem happened.
This time i went back home,It was doing the same thing so i tapped gently with a hammer on a bolt on the flywheel housing and again the engine started. So i quickly flushed it and turned if off.
So what could be causing this? Do these have a bendix drive behind the flywheel or is the problem on my starter?
thx
One the other hand i'm also having starter issues. When i press the starter i car here a slight grind noise and the starter turning but not the motor. Press a few times then the motor turned and we went for another blast. Came back turned it off and the same problem happened.
This time i went back home,It was doing the same thing so i tapped gently with a hammer on a bolt on the flywheel housing and again the engine started. So i quickly flushed it and turned if off.
So what could be causing this? Do these have a bendix drive behind the flywheel or is the problem on my starter?
thx
1995hx
New Member
720 bendix is on the starter replace or rebuild the starter no need to pull the front cover
Sent from my C771 using Tapatalk 2
Looks like you are down sizing a bit, first the 2 Kawa and now these 2.
How is that inflatable boat running?
How is that inflatable boat running?
- Status
