russianphil18
New Member
I am looking for the right tool to pull the flywheel off of a 787 engine from my 97 xp. i dont know if its part number 290-876-488 or 295-000-106 or 290-876-298. i no the thread has to be on the inside of the puller but the 295-000-106 seems the most logical but its thread is on the outside.
maybe it makes sense to make a tool like just spin a bolt onto the thread and place a pin into the crankbolt where the throtle goes and hit that with a hammer. It would be the same thing as the puller but it just wont be pulling the flywheel at the same time as pushing the crank.
Any help would be great but a link with that part would be great!!! thanks everyone.
maybe it makes sense to make a tool like just spin a bolt onto the thread and place a pin into the crankbolt where the throtle goes and hit that with a hammer. It would be the same thing as the puller but it just wont be pulling the flywheel at the same time as pushing the crank.
Any help would be great but a link with that part would be great!!! thanks everyone.
