oil injectors

[olds72]

Just wondering if I air should pass through the oil injectors? I tried blowing air through them and nothing would pass.

 

[Bills86e]

Wire it out. Either a clog or factory error.

 

[olds72]

Wire it out. Either a clog or factory error.

so, it should pass air through it. Neither one lets air pass. I don't want to make the passage ways to large. That would have an effect on the injection system. Whats the best way?

 

[super1c]

Wire it out. Either a clog or factory error.

X2. I used a bread twisty wire. worked fine. Start their and see how it goes. CCC

 

[Bills86e]

Petroleum minerals are easily transformed into a bondo or liquid steel clog that hardens, because of aluminum oxide in the fuel from selector valves or carburetors
bodies paint flaking off or chipped. Mikuni states this as a known fact in its carburetor rebuilding instructions. To "clean & re-paint".