Shop Discount Sea-Doo Parts

Oil Capacity for fish pro

Halobhaf

New Member
Messages
2
Water Crafts
Fish pro 155
I changed my own oil but the capacity in the book is confusing. It says, 3L (3.2 qt U.S. liq) oil change w/ filter 4.8 L (5.1 qt U.S. liq) total. I changed the filter and put 5 qts in but the reading on the dip stick is too high. So which is it? Help!
 

Attachments

enut

Member
Messages
173
Location
Liverpool, NY
Water Crafts
2008 Seadoo Utopia 205, Sold: 1998 Seadoo Challenger 1800
The engine will have 5.1 qt. in it total. When you are doing an oil change with filter, you can only put in 3.2 qt. Suck some of the oil out until it is about midway between the marks.
 

benjilafouine

Well-Known Member
Messages
1,588
Location
Lac-Simon, Quebec, Canada
Water Crafts
Sea-Doo GTI LE 2003, GTI 90 2018
I checked my own manual (2018 GTI) to see the wording.

Based on what I read, I concur with enut. Your good value would be 3L from what I read. The other value of 4.8L is for a dry engine (like first oil addition when new or rebuilt I guess). That is what my own manual says. This means that there is 1L of oil that you can never change! A bit weird but that must be because it is impossible to change the oil from under in these engines.

On my GTI 90, these values are respectively 2L and 3.4L (much smaller engine than yours).
 

Users who viewed this discussion (Total:0)

SPONSORED LINKS

Usergroup

Administrator Moderator Premium Member
Top