Oil adjustment / running lean?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Dakotaly

New Member
I just recently rebuilt an 04 seadoo gti 717. I'm running full synthetic seadoo oil. I didn't go pre mix but I did add extra oil to the tank just to help the break in period. I am almost done with the tank and I pulled the plugs expecting them to be black but they are light brown. Before I put a tank of straight gas should I be worried about running to lean? Is there an oil adjustment to increase oil or do I need to adjust my high speed crew open a tad because it is closed right now.
Two pictures are with flash one is not.

Thanks
 

Attachments

  • 20220604_222544.jpg
    20220604_222544.jpg
    224.2 KB · Views: 22
  • 20220604_223203.jpg
    20220604_223203.jpg
    186.1 KB · Views: 23
  • 20220604_223138.jpg
    20220604_223138.jpg
    165.6 KB · Views: 19
  • 20220604_223111.jpg
    20220604_223111.jpg
    121.5 KB · Views: 18
Your plugs look rich which is exactly as they should with oil injection and premix.
 
I always thought that the light brown on top is where you want to be. But the slightly lightbrown chalk on top with Injection and premix I thought was strange I was expecting them to be more black or slighlty wet to the point of fouling. But if they are rich then I'm happy!
 
20220606_135302.jpgHere is a better photo of the oil adjustment the two lines look lined up is there anything i might be missing refrencing the first reply?
 
Status
Not open for further replies.
Back
Top