New and confused

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Englishbob

New Member
Hi all,
I own a milenium edition that last year sucked up some driftwood and wrecked the impeller/wear ring.
Replace all that and put it back in the water only for it to stall every time you hit the throttle.
Pulled it from the water to start doing some investigating And now it won’t start at all...only thing I’ve discovered so far or only one plug is firing.i was planning on removing and getting the carbs rebuilt anyway but wondering if I have other issues as well.
Thanks for your time
 
How is the battery? It needs to be good and fully charged. Drop new plugs in. Make sure they are the correct ones for your model and gapped appropriately. Unscrew spark plug boot from end of wire. Trim wire back 1/4” and screw boot back on. I would recommend the planned carb job as well.
 
Status
Not open for further replies.
Back
Top