ravens9273
Member
Working on an IS model ski that has zero electrical power. The ski is dead right now. Had power but a lot of error codes all associated with low voltage. Positive connector to battery was completely corroded and broke off. Cut the wire down and added a new tip. Also cleaned the fuse box for minor corrosion. After that ski was completely dead. Still trying to figure it out but the worse thing is having to keep taking the top off and putting it back on to test for power. Is there anyway to start or test an IS model with the top off? This is crazy trying to diagnose what is wrong and when you try this or that and having to take top off then put back on just to connect plugs for DESS