Hull Damage on Fish Pro

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Geauxcrush

New Member
My Fish Pro made contact with the cement boat ramp at very slow speed tonight. Engine was turned off, but drifted to the ramp away from the trailer. As a result, some gouges/scrapes are now on the hull. I did some research and see the kits available for fiberglass repair, but my question is how severe does my specific gouge look? Can I ride it longer before fixing, or should it be repaired immediately? Or is it not even bad enough to worry about? The main gouge pictured is around 2-3” long.
 

Attachments

  • E617CA9D-586A-4393-99D5-7B184DBB0C9F.jpeg
    E617CA9D-586A-4393-99D5-7B184DBB0C9F.jpeg
    148 KB · Views: 34
  • 9421FF9D-4F43-4DA7-94AC-ED04CD4571C1.jpeg
    9421FF9D-4F43-4DA7-94AC-ED04CD4571C1.jpeg
    258.2 KB · Views: 31
Status
Not open for further replies.
Back
Top