Wrkn on my buddy's ski someone tryed jump starting it. Then it would blow the 5a fuse I replaced the diode now it doesn't blow fuse, but it won't turn over at all when the start button is pressed. No clicking noise or anything. Jumped the starter solenoid & it turns over good. How do I test wires going into solinoid?
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Gti 717 won't crank
- Thread starter Cornnutt
- Start date
- Status
ocod
Well-Known Member
For starters do you get the two beeps?
Do the gauges turn on?
That confirms diode worked.
Normally when arcing solenoid, if starter turns motor over its replace it part.
I have one I can send you.
If it works 15 bucks. If not send it back minus shipping.
Leaving town and won't be back for a week though
Do the gauges turn on?
That confirms diode worked.
Normally when arcing solenoid, if starter turns motor over its replace it part.
I have one I can send you.
If it works 15 bucks. If not send it back minus shipping.
Leaving town and won't be back for a week though
- Status
