Front speaker wiring for c180?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

dsw222

Active Member
I want to install a pair of 6.5's in the bow of my 06 Challenger, but I'm not sure how to gain access to the inner part of the boat to run wires from the bow to the radio...

For those of you who did this - what did you need to dismantle to be able to run the wires back to the passenger console area?

Thanks!
 
Anyone?

I'm not sure how to thread the wires from the bow to glovebox because there dont seem to be any easy access points.....
 
Anyone?

I'm not sure how to thread the wires from the bow to glovebox because there dont seem to be any easy access points.....

Bow left hand rest seat comes off and you can fish the wire from there. Here's the pix


59.jpg

Samsung S4...
 
I dont have the 180 but i bet its the same as the others i have seen. Cut the speaker holes with a hole saw.....use an electricians fish tape to run from the holes, down into the ski locker. From there you can run it back up to where you need it.
 
Status
Not open for further replies.
Back
Top