Factory pipe hx

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
I can't remember but I'm still giving it plenty of water to keep it cool if I remember correctly this pipe gets you 20 or 25 horsepower you only want 15 or 18 of it to make it reliable

Thanks for the advise I like your setup because I know you said you had 60 hours on it. If you ever get a chance to check your adjustment screw turns (without screwing up your settings) or if you ever have opportunity to temp gun the chamber let me know ... thanks again for your advise
 
Also glsmohio do you remember where the 2 silicone orings went? I'm assuming they both go on this piece one inside smaller diameter and one outside larger ?
90.jpg
 
The stinger size will be 38mm for more little reliable, but you need 96oct ,or this pipe will eat piston for dinner...loll
 
yes I think your right. you can still get the orings from factory. I'm just running high pump gas and still going strong
 
Status
Not open for further replies.
Back
Top