degree wheel pdf

[shakedown]

Here is a printable degree wheel I found useful

 

[seadoosnipe]

Purchased....

If your going to be doing this kind of work, setting up more than one rotary, you can purchase the degree wheel from a school supply store like "Office Max"...............:cheers:

 

[lynnboy021]

If your going to be doing this kind of work, setting up more than one rotary, you can purchase the degree wheel from a school supply store like "Office Max"...............:cheers:

i know this post is really old but i dont see any degree wheel in any stores...

 

[Spimothy Leary]

i know this post is really old but i dont see any degree wheel in any stores...

yes you have.. its called a protractor

 

[lynnboy021]

ok so the 180 will work i dont need the 360????

 

[KCB 850]

Nope don't need all 360 of 'em :rofl:... You only need the ability to add and subtract.

 

[lynnboy021]

Nope... You only need the ability to add and subtract.

so if i get the 360 do i need to do math??? sorry suck at math

 

[KCB 850]

so if i get the 360 do i need to do math??? sorry suck at math

You'll be good. Wait a minute....how are you with clockwise and counterclockwise?

Just jokin' you'll be OK either way.

Robert

 

[lynnboy021]

lol um one last ? do i care about only the valve opening??? my 97 spx is vo is 159 to is 146.5 btdc and tc is 64 atdc?????

 

[KCB 850]

I make both marks for the opening and closing degrees. But others may do it differently I guess.

I haven't tried to determine if it makes a difference. I suspect that it would or the guy writing the service manual would of stopped after he told us to mark the opening degree location. :rofl:

Robert

 

[lynnboy021]

lol thanks

 

[stevieTypeR]

I printed the degree wheel out it is smaller than the rotary valve will it still work ok