98 seadoo spi won't start not even click need help

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
I have a 98 seadoo spi I had rolled it in the lake before that it ran fine after taking the dive it will not start won't even turn over click or anything battery and cables are good checked fuses any ideas of what I need to do and I jump the starter just to make sure thats not it this is my first pwc so i need help
 
Per shop manual (found in premium section):
If 2 short beeps are not heard when
installing safety lanyard, refer to DIGITALLY​
ENCODED SECURITY SYSTEM 08-06

Doesn't beep, correct?

Basically you may have a shorted out MPEM if you cannot find a faulty connection anywhere. Grab a multi meter and start testing continuity. If all checks out, most likely will be mpem.

If it does beep, the starter may have just died.

Post back and let us know.
 
Status
Not open for further replies.
Back
Top