Hi, I recently picked up a 97 xp 800 too cheap to let go. Needed a top end rebuild which I have done and was missing the lanyard. I have done some research and still haven't found an answer. I know I am unable to start it etc, though have been told without lanyard you can press start button 5 times and it will beep for diagnosis mode. Have tried just too see if it is good electrically until I get my lanyard programmed. Tried it and no beeps, no lights or anything on the dash come up.
So far I have tested the buzzer for continuity and put power to it, all is good, start switch has continuity, there is power going to the mpem etc, and all fuses are good (though the top fuse on mpem, 7.5a, has no power to it??)
Earth cables are good also.
Any ideas would be much appreciated before worrying about MPEM replacement.
Cheers, Jason
So far I have tested the buzzer for continuity and put power to it, all is good, start switch has continuity, there is power going to the mpem etc, and all fuses are good (though the top fuse on mpem, 7.5a, has no power to it??)
Earth cables are good also.
Any ideas would be much appreciated before worrying about MPEM replacement.
Cheers, Jason
