96 xp 800 keeps burning 5 amp fuse and it won't beep or start at all

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Josue Sousa

New Member
Hey guys, thanks in advanced for any reply on this matter. My ski did a so called diesel. After few seconds I realized just pull the chocke and vuala. Well after that happened I lost beep and light and any signal of life. Ok first I checked all fuzes and the 5 amp from vts is burned. Installed a new one and burnup again. Well I removed the cdi wire that is in front of engine and fuze and vts works fine. As soon as I plug the coil plug back fuze burns again . It it the mpem or maybe cdi coil ? Please help. Thanks.
 
Status
Not open for further replies.
Back
Top