please help 96 sea doo gtx flooding
I have a 96 sea doo that i just got the carbs were off of the motor and one was disassembled one was still assembled.I cleaned the one that was apart and bolted both back on.I charged the battery and cranked it.the motor started but would die when opening the throttle.I then pulled the plugs and the front cylinder is full of fuel and that is the carb that was already together.I pulled the carb and checked the needle and seat and they look fine cleaned it all out and put back on the motor started up fine but still had the bog.I then pulled the plug out and cylinder is full of fuel again.I can restrict the fuel going to the front carb and it runs fine.What do i need to look i would be thankful for any help
Mark
I have a 96 sea doo that i just got the carbs were off of the motor and one was disassembled one was still assembled.I cleaned the one that was apart and bolted both back on.I charged the battery and cranked it.the motor started but would die when opening the throttle.I then pulled the plugs and the front cylinder is full of fuel and that is the carb that was already together.I pulled the carb and checked the needle and seat and they look fine cleaned it all out and put back on the motor started up fine but still had the bog.I then pulled the plug out and cylinder is full of fuel again.I can restrict the fuel going to the front carb and it runs fine.What do i need to look i would be thankful for any help
Mark
Last edited by a moderator:
