4tec mpem repair pics.

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
So this post might be pointless but I wanted everybody to know that I have an 04 GTX Limited 4tec 215 and my mpem module was bad. I know this from hooking up a candoopro and the mpem was not responding. so everything worked on this ski except for Speed compass in fuel level. that said I replaced the mpem and all is fine. To those that maybe want to repair their module, I don't know that it's possible though I have seen it done on older skis (two Strokes for example) here are a couple pics after I dug off a lot of the silicone so maybe you can see the boards. again maybe a pointless post, but maybe somebody has use for it.
 

Attachments

  • 20200330_145139.jpg
    20200330_145139.jpg
    6.4 MB · Views: 53
  • 20200330_145149.jpg
    20200330_145149.jpg
    7.4 MB · Views: 50
  • 20200330_145620.jpg
    20200330_145620.jpg
    4.8 MB · Views: 41
I have an 04 Speedster MPEM that I carved the insulation out of to see if I could spot the reason for the #2 plug not firing. That's about as far as I got. I don't even know how to take it apart further...
 
Status
Not open for further replies.
Back
Top