2000 seadoo rx

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Jclark782

Member
So I’ve got a 2000 rx that’s going to need a rebuild any performance improvement suggestions? Impellers pipes etc?
 
Basically a 951 is maxed out from the factory. You can add performance parts like porting and higher compression but your reliability and engine life hours go down dramatically. There were very few pipes made for them so it would be difficult to find one and the twin pipes cracked all the time.

If you wanted to spend some coin sending it to Group K for a sleeper kit wouldn’t be bad.

The stock impeller is actually very good.

And finally if you are rebuilding it you better be doing the crank and balancer too.
 
Also Coffman and rossier crack!! I have rossier, she leaked, i repair it!!!Stay way factory pipe! You could add flame arrestor!!
 

Attachments

  • 70B3C87D-2D5C-4A7A-804C-032B786CC089.jpeg
    70B3C87D-2D5C-4A7A-804C-032B786CC089.jpeg
    3.1 MB · Views: 31
Status
Not open for further replies.
Back
Top