1996 GTX Will & Wont Turn Over

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

dcar72

New Member
Ok i took some advice and pulled the number 1 plug. Turned over good and wanted to start. Put the plug back on a turn over again but wont start.

PULL PLUG 2 (rear) and it turn right over except oil shot out of it all over the place. Is this normal???
 
Last edited by a moderator:
How long has it been sitting for? Ur crank seals are probably bad and oil leaked into the crank. Get all the oil out then try starting
 
Status
Not open for further replies.
Back
Top