hypersniper2010
Active Member
i jut managed to score a 95 xp with the 717 motor and a 91 polaris 650 tripple for $150.00 both hulls are mint and the xp is 99% complete. ok heres the problem. they had been sitting for a while and the motor didt move when i tried to turn it over by hand so i sprayed wd-40 down the plug hole and let it sit all day. hooked up a battery to it and tied to turn it over and to my surprise it turned a little bit, kept clicking it and it kept moving. then i pulled the top of the motor off and cleaned out the jugs and they didnot look bad at all. put it all back together and did a compression test on it and both were 125 psi. checked spark and got nice bright strong blue spark. so i then dumped a little gas/oil mix down the holes, cleaned plugs and them put back in then fired it up and it went to start but then stopped. when it started alot of water shot out the back. i then pulled plugs and they were kinda white foamy wet.
im thinking theres water in the oil/gas or water is still in the exhaust. or in the carbs but theres surly water getting in the jugs somewhere somehow.
any sugestions on what to do next.
drain everything? pull motor and flush bottom out? pull exhaust and drain ? got a great deal on it so i dont mind a little work on it.
thanks
im thinking theres water in the oil/gas or water is still in the exhaust. or in the carbs but theres surly water getting in the jugs somewhere somehow.
any sugestions on what to do next.
drain everything? pull motor and flush bottom out? pull exhaust and drain ? got a great deal on it so i dont mind a little work on it.
thanks


