jet pump

So i just got done rebuilding my jet pump, everything except the impeller and the shaft it screws onto. After i finished i spun the impeller and noticed that i grazes the wear ring in 1 maybe 2 spots up near the edge of the wear ring. You can feel the hesitation when it gets to that spot or...

Hi All I want to remove the jet drive from the boat. I have removed the power head (in process of overhauling it) and also removed the qty 4 nuts holding the drive hsg cover. The problem is that I can not remove the housing. I have tried various things over a period of 2 weeks but without...

Hello everyone, I just got a new to me 2005 Seadoo speedster. It has twin 185 hp engines. I started both engines up and they sounded great. I then checked the torque on both pumps. They were each a little under what the manual specified. After the re-torqued the port engine started to make a...

Hi. Last fall my ski's pump seized up and pulled it for the season as I was moving and no place was available to rebuild it... I did however pull it and put it in a tote... then winterized the engine... I rebuilt the pump and installed it and when I fired it up, there was a banking of metal...

Okay so I need some help, please and thank you! I bought a 2004 Seadoo Sportster LE DI this past year, ran into a problem recently. Long story short, I need to replace all the impeller and jet pump from what I found online so far. I ordered the entire jet pump housing, complete with shaft...

Hey guys, I need a little advice/hints for replacing my Jet-pump in my 07 wake, I have ordered received the new pump from SBT and its the new Al housing and I have found that the shaft is different, my ordinal one was. The ordinal one had a 12mm alan head to remove the impeller and this new one...

Hi, I just bought a 1995 Seadoo XP and had it serviced before I took it out. When I got home I took the drain plug to the left of nozzle out and lifted trailer all the way up for water to drain out. Well I went around to the front for something and when I came back around there was a big puddle...

After removing the motor, I know that it is best to realign the jet pump. I cant seem to find the correct size Neoprene seal however, Its a 2001 GTI 717. Some places I look say its 140mm while others suggest 155mm. Does anyone have any advise they could spare me, so when I go visit Dr. Honda...

Hi, I looking for complete jet pump to my 2006 Rxt. offers in pm please. Thank you!

Welcome to all the members! I looking for complete jet pump to my 2006 Rxt. offers in pm please. Thank you!

02 rx, Bearings are bad in the jet pump, Impeller is nicked like heck, the impeller is eating up both sides of the plastic before and after the wear ring. wear ring is fine though. So I have the assembly removed, how do i Remove the impeller?

where can i find the model or serial or part # of a jet pump assembly to cross reference it for use on other crafts. or do u just base its compatability on size and shape? thanks

Sooo, I have my 1997 Challenger in at the dealer for winterizing. They called and said they went to change the jet pump oil, and it is full of water. They are recommending removal for inspection, etc. How big of a job is that? I'm not really wanting to pay them if I can do it myself. What...

Hey fellow Seadoo owners. I have been wanting a PWC forever! But the Army doesnt pay enough for me to have too many toys and my Jeep takes most the money ;) -- Issue is this. I recently bought a 1993 GTS from a guy who gets them as trade ins fixes them up and sells them. The seadoo runs great...

Hello, I have an old 95 XP with a stuck jet pump. I am trying to remove it from the ski but it will not come out. I have removed all the visible bolts the should hold it in place. What else should I try to get it out. Thanks

i ordered a wear ring from sbt and it literally fell right into the jet pump so i ordered another but you still dont have to use a press to get it in although it is snug is it ok to use this wear ring or what should i do

I have a 96 Speedster that needs 2 complete Jetpumps with reverse gates, throtlle/reverse cables and controller. My boat has 2 720 engines. If anybody has those parts with a reasonable price, please let me know. Thanks

I am removing my jet pump to replace my wear ring on my 96' GTI. to remove the pump from the hull i need to remove the bailer pickup tubes and the water inlet tubes. With what, and how do I do this? THe pickup tubes look like they are stuck into the fiber glass. seems hard to remove ..yet i am...

it feels like there is a shear pin busted somewhere, or a clutch is slipping somewhere, because it jumps up, then levels out but will not get up on plane or go faster than 10. I rebuilt the motor, and have never run the boat... it was a rental. it's a '94 Seadoo explorer with a 583. Is there a...