gtx

Hello All, Bit of newbie here with a new old seadoo, 1997 GTX. I'm trying to set it up for some fishing with a crate on the back and I inevitably realized my pisser is going to spray directly against my cooler. Considered the inline valve, then read I may want to relocate so it will continue...

I am reading a P1607 code on my 2004 gtx sc. when I looked in the manual, it said no service action. Has anyone fixed a P1607 issue? I have started checking the fuses in the MPEM for corrosion, but no luck yet. should also mention that when I try to start the ski up, there is a spark on the...

Hello! Brand new to the forum and not a Sea Doo owner yet, but plan to pull the trigger soon. I currently have a 22 1/2 foot ski boat, but kids are growing up and moving out so we are selling the boat and downsizing to a Sea Doo. A friend towed us with his Yamaha Jet Ski so we know what it is...

Recently bought a 2004 GTX Wakeboard edition. Knew it had some issues but was willing to fix it myself. Did the usual oil change, coolant flush, fuel flush, and new spark plugs. I have replaced the “spark plug tubes” because the bottom rings on those were allowing oil on the plug. That seemed...

Hi. Summary: 12v low on display...won't start in water...started on trailer then backed into water...kind of ran, but not to standard max rpms. Compression is fine at ~145. Okay, so, checked fuses in rear electrical box. One 20amp was okay, the other 20amp was blown, the third fuse was fine...

Hello all, I have a 1996 GTX. It has moisture damage inside ignition housing and i am replacing just about all contained parts. My question: Is it possible/very difficult to remove old and install new oil seal in the magneto housing without the pusher and handle specified in the shop...

Hello, everyone! So, after many days of searching the forum, reading on restorations, and wondering how to go about my two “problems”, I joined the forum. The reason for joining and searching is that I recently acquired two semi-neglected Sea Doos for free. One is a 1992 SPi 580 white engine...

Hello, I recently bought a 2002 Sea Doo GTX 4 Tec and the instrument cluster is dead and I'm sending it in for repair. The issue, however, is that the ski won't reach max speed, it will only go 40mph and it should go 55-60mph. The tach isn't in and working but it sounds like speed is matching...

Hi all, I am new to seadoo’s but have always liked the old school skis so I finally grabbed one. It is a 1990 3 seater gt with reverse, it needs a motor which I picked up to swap out of a good running “parts” ski. I figured while I was replacing the engine I would replace all of the fuel and oil...

I recently bought a 97 gtx from a guy that had let it sit for years. I replaced the old gray fuel lines right off the bat. Rebuilt the carbs. New battery. New spark plugs and wires (cut 1/4" off before installing boots) . Cleaned the rave valves. Drained the fuel tank. Replaced the oil injection...

I am looking for a shop that can help with my 2 stroke RFI in Austin, TX area. I have called all the places and none will touch it. Guess they don't have the expertise or just don't want to mess with the RFI skis. If it was carb'd there would be several options. Hoping someone can point me...

Hi All, I bought a 1993 Seadoo GTX as a little toy for the summer. I've had it out on the lake a handful of times, runs well and starts up fine. The steering is a little tighter than I expected. When I was cleaning it today I noticed these wires coming out the back by the propeller... Any...

Hi everybody, and thanks for this forum. New to jet skis, but kind of familiar with engines, big and small. So we just got a 2008 SeaDoo GTI 130 SE, about 200 hrs. After a plug change and fresh gas it seems to be running great. Tops out at about 52 mph. Decided that our family of four needed...

Hi all, I just purchased a 2017 SeaDoo Limited GTI. I also own a 2015 GTX 155 and 2018 GTI SE 130. My GTX and GTI Limited calls for a 12V/ 30AH battery. My GTI SE calls for a 12V/ 18AH. The larger 30 AH battery fits in my GTX fine and the 18AH battery fits fine in the GTI SE and is the...

We have a new to us 2013 GTX with 21 hours on the clock. Have changed out all of the gas, plugs and now doing the oil change. (We did our recently purchased 2006 GTI, with 128 hours, also which was super easy) According to the CanDooPro, the last service was 2019, but hoping that they did an...

I have been a Seadoo customer for many years but always with the RXT model. This year 2021 I took a chance and bought the GTX 300 Limited. I haven't been to the water yet, but I like a lot the model, but honestly I have some concerns about the reliability of the iDF function. Can you please...

I just bought a 1996 GTX and it is missing the front nose bumper. The part was 921000223 but it has been discontinued and I’m having trouble locating one. Is there another nose bumper I could put on instead that would be a good fit?

Hello, I was just given a 96 GSX with a seized motor and a rear electrical box full of water. I freed the motor and checked compression (shockingly it had 162 165), replaced the starter solenoid as the post was corroded, the two smaller ring terminals that go the the battery cable post, and the...

Hello All, I was helping a buddy rebuild the top end on his '99 GTX RFI (Rotax 787 Motor). One of his pistons blew apart and scoured the cylinder, so we ordered new cylinders, pistons, top end gaskets and seals, wrist pins, and wrist pin bearings. I had seen that the replacement ones he...

Been fighting this unit all summer, and I am about ready to throw in the towel and scrap it. At this point, the engine will start and run fine on the trailer (no hesitation, no bogging), but on the water it bogs badly at and above 1/3 throttle, in fact the RPM does not increase at all through...