fuel pump

The further repair of my poor, malfunctioning vessel of speed and inhumanity has hit a frustrating brick wall. Partially this is of my own inability to properly measure threads (that problem is thankfully solved). I am trying to fit a fuel barb onto the aluminum slider mechanism (to facilitate...

Hi fellow merc owners. 2nd time in my islandias life that it's been towed. Last was due to a broken belt. This time it is fuel starvation. When I squeeze the strader valve out comes air. From the compressor but no fuel? I removed the spin on and drained it No water in it. I turn key...

My primary pump just went out. I havent been able to find any used Merc parts dealers, and the cheapest on eI could find is $581. Can someone point me in the direction of places that sell fuel pumps for cheaper? Or used dealers. Thanks

My fuel pump went out, and I cant find a new on efor less then $600. I cant afford a new on eat that price so im wondering how can I get a used fuel pump? At the injectors the psi needs to run 34-36. What are some used merc part dealers? Please help me!!!

Hey All, I am having difficulty getting fuel to the carbs on this ski. After a carb rebuild (dual), last year I could get the ski to run fine, after a few cranks. On non starting days I shot a bit of carb cleaner into the carb and got the engine to fire and pump fuel. If it sat for longer...

hi, i have an XPDI 2003, since i got it i have had problems getting any speed before the warning lamp comes on and goes into limp mode. i have been working through the manual and found that the Fuel pressure before cranking is 24/25 PSI which is ok, but when cranking it only reaches about 60psi...

I had a problem with my 1996 xp (787). It hesitated when I accelerated, and would cut off if I didn't let off the throttle. Looking back, I think this original problem was the fuel filter in the carb. But, I rebuilt the fuel pump (including the carb filter), replaced the gray fuel lines, put...

hey guys.....i went to start the ski last night as i am planning to take it out in a couple of weeks. when i put the dess in the tachos all work, i hear the two beeps, some sort of pump or motor and then as i try to start the engine it sounds like a bearing noise only....not even engine...