bilge pump

It seems that the lowest point in the boat is not where the factory place the bilge pump in the engine compartment of this boat. I leave the boat in the water for a week at a time between uses and the ski locker can gain significant water if there is a small leak somewhere which doesn’t trigger...

My Bilge pump is wired direct to the battery with a Manuel override when the key is on. For some reason it stays on (keeps running) When th email power is switched off and drains the battery. Any suggestions would be appreciated.

97 Sportster Bilge Pump not working when I turn switch on. I took multimeter to the male connector that provides power to the unit and got a reading of 0.8 volts with switch on. Turned switch off and meter read 0.4 volts. Does this mean my switch is working properly and getting correct voltage...

2008 Sea-Doo 180 Challenger So my original bilge pump went out. I am replacing it with a Rule pump with an automatic sensor built in. It now works perfect in auto but I cannot get the manual switch on the helm to work. Is this as simple as a bad switch possibly or is there something else that...

Does anyone have or can take a picture of the bilge pump/switch set up in their c180? My 05 came with a Rule which recently must have stuck on and burnt up. Rule has since came out with a different model so I'll have to drill the rivets for the new base anyway and figured I'd switch to the...

Anyone know if the bilge is this year / model is automatic ? I can’t seem to find that info anywhere. I’m thinking it’s not auto.

So I got a leak somewhere. Just bought a 1997 seadoo speedster twin 85. My bulge pump is dead I think so I’m gonna replace. But I am confused on the drain holes. Back of the boat there are 2 holes. The left hole has threads on the inside of the hole. I have nothing screwed into that. And then...

Hi Guys, I have a 2003 Seadoo Sportster LE. The Bilge Pump, Nav Light and Bilge Fan all used to work perfectly then they all stopped working at the same time! 1. I have checked the Pump, light and Fan with a direct 12v power supply and all work 2. I have checked all 6 fuses (please see...

Without a doubt, one of the best accessories you can get for your PWC is a bilge pump. The bailers that come with your jet ski just aren't enough to keep water out of your engine when a hull breach occurs. This video will show you how to install a little insurance to protect your baby. If you...

Without a doubt, one of the best accessories you can get for your PWC is a bilge pump. The bailers that come with your jet ski just aren't enough to keep water out of your engine when a hull breach occurs. This video will show you how to install a little insurance to protect your baby. If you...

OK, I just took out my 2001 Utopia 185 for the first time aside from the test drive. Just a handful of random questions: - I can't hear the bilge air blower. Is it really that silent or is it not working? How can I check it? (ie where is it?) - The bilge pump is disconnected from the...

I see there are a lot of xp threads but most of them seem to get way off topic so deal with it. I am getting my 97 xp tomorrow I did a walk through and compression test and everything seems legit. the guy I am buying it from all he does is work on PWC and has a very good rep around here...

Hello, I've owned the boat for several years now and have worked on you name it and fixed it or replaced it. So the other day I noticed the bilge pump wasn’t working. So, I checked the 3 amp fuse and noticed it got burned out. I replaced it figuring this would solve the problem I also took...

I live in South Florida and took my boat out for it first run since purchasing in March. Ocean water temperature was around 80 Deg. When running my Bilge pump I noticed the water coming out was very hot (Almost burning my hand) Could this hot water be caused by the cooling plate which is...

Hi all, Love all the advice on this forum. Hoping someone can help me. Have 2008 speedster 215. Have a broken bilge pump. Dealer wants to put a cheaper aftermarket one in but it won't turn on automatically only manual. Any reason why I need it to be automatic? Thanks in advance

Hey all, first time poster here. I've been looking around, but can't find info on my exact problem. The bilge pump in my 96 Speedster is acting up. At first it wasn't working at all, and immediately blowing any new 3A fuse I installed. I pulled the pump and cleaned it up. Now it spins and...

I have bought a Seadoo Speedster 1996 FixerUper. It was in heavy condition. Ive rebuilt one of the engines. The second one works fine. I took out the oil tank. The oil was pouring down right into the cylinder. Imma just mix oil and gas inside the gas tank. Everything works fine. Heres the...

Hi all - Brand new 2006 Sportster owner here and I have a really basic newbie question - we just got our new to us boat and it did not come with an owners manual. My question is - should the bilge switch on the dash do anything when there is no water to pump out? We found we...

Hey guys, Thanks for all your help with my water in the hull issue. I checked the carbone ring and the boot. It needs to be replaced but it's really not that bad. Anyway, I got off work early yesterday and took it out to really pin down the issue. I noticed that the bilge pumps were not...

So here's what happened... The back section of the SeaDoo got flooded (where the battery, bilge pump, etc...) So I replaced the battery. But now whenever we TRY and start the SeaDoo, it will do the following: Put key on... SeaDoo beeps twice Push Start/Stop, SeaDoo TRIES to kick...