951 engine

Greetings and salutations to all, Im new hear on this forum and I've already found lots of great info! But... thats aside from the point. I have a 98' Gtx Ltd with the 951 engine. I just finished replacing the engine (previous owner managed to bend a rod somehow). Upon starting the new engine...

I know it sounds more simple than it probably is, but this thing is driving me crazy. Ran a little rough when I first bought it a few months ago, but no problem starting right up every time, even without choke mostly. Had the SeaDoo stealer tell me there was water in the engine when he...

2000 Sportster LE 951 Carb engine Not getting spark Trigger is coil within range... Two Beeps when Key is on post Cranks Strong No power to primary side of coils. Should this be constant 12vdc as with collapsing coil? No short in wires to primary side, Good ground in rear electrical...

Trigger is coil within range... Two Beeps when Key is on post Cranks Strong No power to primary side of coils. Should this be constant 12v as with collapsing coil? No short in wires to primary side, Good ground in rear electrical box. All fuses on MPEM and one in rear box checked

I put together my 951 DI and am pretty happy, it's just now it sounds like there is a rattle, maybe not from the engine, but maybe from the jet pump. Not sure , but if this link works, can anyone comment. http://www.youtube.com/watch?v=DItUW51yWI4&feature=youtube_gdata_player It's a link...

Well I started putting the bottom end together, and thought I had done pretty well .... so I had all 24 bolts in and sat back and re-read the manual ... Damn, a little sentance that says 'If your balance shaft has a hole in the bearing, then make sure this hole is facing down' Damn Damn Damn...

Hi guys new to this, and just bought a broken 951 di ... Which may not have been a good idea based on what I have read here .... Oh well, it's done now ... So I am looking to get it back in the water... The problems/story so far... I have taken the engine out ... Took it apart, and 1...

2000 951cc SeaDoo 2-Stroke XP AIR BUBBLE IN OIL LINE A friend of mine was riding the XP high end for about 30 minutes and making really steep zig-zag turns down the mighty Colorado river last summer, then he told me the engine shut off, he tried to re-start and heard clapping sound from the...

Hello I have just bought a rebuilt motor for a very good price form a person overseas. By the sound of it i am very Confident that it is a Carby model (to suit my 2000xp) but if its not what it the differnce between the engines? will i be able to replace the DI parts with the Carby Model part...

so i bought a 2000 rx 951 about 2 months ago with a bad rod bearing. so i replaced the motor got everything hooked up and come to find out nothing has power? i have the positive cable on the starter the neg in the hole right next to it. i also checked all the fuses and they are all good what...

During winterization I dropped something through the spark plug hole and had to take off the head cylinder to get it. Does anyone have a link to the bolt tightening pattern as well as how much i should torque them? Also if there are any other helpful tips I should know while doing this it...

2001 XP (# 951CARB) Possible Thrown Rod Bearing:confused: 2002 GTX Bombardier 4-TEC 2001 XP (951) carb Hi fellow water-sport enthusiasts! My friend and I went out to Parker, AZ, a few weeks ago to the Colorado river…we live in the “OC” (Orange County, Ca., not Florida) so it’s about a...