Shop Discount Sea-Doo Parts

Search results

  1. whitewheels

    Hot rod sporster LE

    Lights going to be sick on the water [emoji41]
  2. whitewheels

    Hot rod sporster LE

    Also got a boardrack....
  3. whitewheels

    Hot rod sporster LE

    [emoji2]
  4. whitewheels

    Hot rod sporster LE

    This season I finally got my tower [emoji16] Did a complete overhaul of the pump and driveline. Had some trouble geting the pump seal agains the rideshoe with the new aftermarket wearring. First real ride was yesterday
  5. whitewheels

    rebuilt pump made my boat worse

    Yeah that sounds right. Using my old oem neopren seal now because the new sbt one got all distorted when I got the pump mounted the first time. I now remember that the old wear ring was an oem with the outer lip and the new one is a sbt without the lip....[emoji848]
  6. whitewheels

    rebuilt pump made my boat worse

    Last season I saw that my wearring was bad and "choclate milk" in the impellerhousing. So this winter I put new bearings in,new wear ring,new neopren seal and new carbon seal. Due to cold weather the boat sat for a long time and it wasn´t until a couple of weeks ago we went out to pull some...
  7. whitewheels

    Another fishfinder question

    I'm using transom transducer inhull. Donno witch others there is to use??
  8. whitewheels

    Stutter 951

    Went out a second time yesterday. It's getting better. Was able to do a run at 7000rpm with some "stutter". Before it would cut out every 10 sec or so
  9. whitewheels

    Stutter 951

    Second video
  10. whitewheels

    Stutter 951

    After siting for about 3 week due to bad weather I took the boat out yesterday. Started just fine,died once on the way out from the docks but started just fine again. The when I got it going it ran good for a moment then start to "stutter" ,like it was only firing on one cyl,then it got going...
  11. whitewheels

    Another fishfinder question

    Just a quick update on my transducer. Couldn't get it to work. As soon I started the engine I got crazy readings. There is no wire problem I thought I had either. Pulled it out and droped it outside the boat,worked just fine. Will try jeffrt bilge location next
  12. whitewheels

    Acc injectors or what ever...

    Check valves are clened and cleared but saw another post when a guy had a diagraph inte acc pump that was worn so slightly. He had the same problem so will replace it
  13. whitewheels

    Acc injectors or what ever...

    Donno what the are called. Bras injectors just at inlet of carbs? Anyway. The mag one inject fuel just fine when you dab the throttle,but the pto one doesen't. If I hold a finger on the mag one the pto starts injecting.... you can also see on the plugs that they're not synced Any suggestions...
  14. whitewheels

    Primer question

    ....but can you instal a primer on a boat,is it difficult or impossible?
  15. whitewheels

    Hot rod sporster LE

    Thanks [emoji16] I enjoy restoring it as much as riding it. It's offcours not 100% troublefree but it's very cheap to buy compare to the fun level [emoji16][emoji109] Saving up for a tower....will be the icing on the cake [emoji41]
  16. whitewheels

    Black tip/Hydroturf mats

    Thanks [emoji16] Got a little builders tread on my restomod here: Hot rod sporster LE Hot rod sporster LE
  17. whitewheels

    Black tip/Hydroturf mats

    Well...don't know,think it was called Diamond cut [emoji6]
  18. whitewheels

    Black tip/Hydroturf mats

    Before and after....noting wrong with the old hydroturf but didn't like the look. A real pain in the *s to get of....but turnd out really nice
  19. whitewheels

    Another fishfinder question

    If you going to use silicone....try that location. Easy to undo. I'm gonig to try silicone as Mayberry az suggested. This is my location....(pic not from my boat but same spot)
  20. whitewheels

    Strange sound

    Doesen't sound piston/ring/cyl related..... broke bendix gear?....[emoji848]
Top