Shop Discount Sea-Doo Parts

Search results

  1. Waterbug13

    Bottle cap cripples my 210 Challenger !!

    I had a piece of sea weed stop mine,had to jump in the lake and swim under and pull this little thing of grass out. If course it happens in the roughest and busiest area of the lake on the 4th.
  2. Waterbug13

    looking for seadoo propulsion system service tools

    I did mine a month or so ago and only had the shaft support and I bought a tool on eBay that looks like a bent pry bar with a fork and to slide the ring back. Cut 2 2x4 to lay over the engine bay opening to lay on and maybe a pad or pillow on it. This makes it a lot easier! The jobs not bad at...
  3. Waterbug13

    Screwed myself out of $5700- need repair help / advise please

    The pump housing I have found out by replacing mine that the non supercharged and supercharged r the same. The impeller is different and drive shaft bigger on super charged models. It looks like he sucked up a ton of gravel and beat the crap out of the pump and impeller. I have a couple stock...
  4. Waterbug13

    2012 SEADOO 210 260HP

    I noticed that on the S model they test the swim deck seats don't have the lounger like my SE does and it must not have the ski mode since they said it only has eco, docking and regular modes. But the speed with one motor is just a little slower then my twin non supercharged model and I don't...
  5. Waterbug13

    2012 Sea-Doo Boat Service Manuals

    I bought my service manual for my 2012 210 on eBay, brand new just recopied I think
  6. Waterbug13

    Coolant?

    I need to add some coolant to my 2012 210 what other then over priced seadoo coolant are you using? Also ideas on getting the plugs out of the heat exchangers that won't budge? Or another way to flush the systsm. Thanks
  7. Waterbug13

    Pump housing O-rings and seals

    I understand! I am on a learning curve myself. The only reason I thought it was the mount was because I just got mine all back together finally. Mine had salt water damage that I had to fix from a previous owner.
  8. Waterbug13

    SOLD 2012 SeaDoo Challenger 210 w/Wake Tower & Twin 155's

    I have the same boat less the tower, I bought it used and have no idea.what cooler they have what do you use for the built in? Mine has teak seadeck but I was close to going with the gray! Both look good
  9. Waterbug13

    Found my leak

    3m 4200 is what I used, I'm not sure how well the stuff I use at work will work in a boat. Yes the cable is for the weedless systsm.
  10. Waterbug13

    New to me tow vehicle

    Just bought this a 2013 durango RT and got rid of the 2011 Silverado. She definitely has more power
  11. Waterbug13

    Found my leak

    The white sealant has a bolt threw it and not. I think its were the drive shaft shield is bolted threw because the screws are small. I tighten everything up and replaced the sealer on the ones that I saw leaking. Going to put it in the water this weekend and run everything. I am taking it to...
  12. Waterbug13

    2012 SEADOO 210 260HP

    I seen that listed in my service manual but I've never even seen one for sale. It would be interesting to see how it does with one like mine that is a 210 non supercharged with twin 155s let us know what you find out
  13. Waterbug13

    Pump housing O-rings and seals

    Is that the pump housing or the mount for the pump? It looks more like the mount attached to the boat were you bolt the pump on. If it's the pump housing take it to a dealer and have them get u the rite parts. If it's the mount you will have to take the boat in or show them the picture.
  14. Waterbug13

    Trailering long distance with a cover

    It's not a factory cover, I just bought one last summer for mine. The poppy cover is made for towing and has the vents in it to let the air make it a vacuum so it doeant swell up. I bought supports for mine to help keep it up with no low points for when it rains. But these are very heavy duty...
  15. Waterbug13

    Found my leak

    These are the ones I found leaking a steady stream of water.
  16. Waterbug13

    Found my leak

    The bolts are not loose at all not is anything bent and only one of them was leaking pretty good. I work in a body shop and silicone is not allowed in there because of paint issues. We do use a 2 part seam sealer that we us on cars like the manufacturer uses. Use it inside the haul not the...
  17. Waterbug13

    Found my leak

    I have a 2012 challenger 210,, I bought it last summer and ever time I went out no matter what I would have water in the haul and if she sat over night I would have a few inches in the locker. I replaced one of the carbon rings and bellows that had rust around it and was original. I got her all...
  18. Waterbug13

    2012 karavan dual axle trailer for a my 210

    You mean the width of the rim? Going to 14 I wasnt sure if they would rub the fender or touch each other. Just didnt want to buy them and it not work. I emailed the trailer company a few weeks ago but never heard back
  19. Waterbug13

    Jeep rant

    I work in a body shop so I see this all The time with parts taken off of unplugged or replaced. The computer doesn't know it's hooked up and needs to be told or it turned on. I don't think it has to go to dealer but it does have to be done with a scanner. Believe me it's not just jeep pretty...
  20. Waterbug13

    2012 karavan dual axle trailer for a my 210

    The trailer has 13 in tires on it for some reason but I want to switch to radial tires and 14 if possible has anyone done this or know if it will work without issues? Thanks
Top