Shop Discount Sea-Doo Parts

Search results

  1. Sofla

    Carbon seal

    Is this an open offer that i could get with.. The tool offer i mean?
  2. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Perfectly clear and very relevant specific information. Many many thanks. I can say with certainty that i dont see those rpms. If 6500 im rounding up. What factors do i look for given this symptom? Broad i know. Thanks.
  3. Sofla

    Carbon seal

    Hey guys... have either of you had any problems getting the shaft out to do the job. Im having a bad time with what seems to be a straightforward job. First the allen head bolts are so stuck that i cant budge em ... even with an allen wrench in the hole and as tight vice grip. Then once...
  4. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Got the manual as suggested. If i were to think that even as it seems to be running good..its not really giving the topend i would have expected? What should i be looking for as far as a benchmark? Rpms vs mph? Typical load only driver riding.?
  5. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Seriously?.. okay.. Heheee thanks a pile for that precise detail. Upon first inspection I could see that the sensor was broken away from its mount and the end was destroyed, lending me think that obviously this is the problem if not at least A problem. Apart from a shitty running, presumbly...
  6. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Okay.... so ive replaced the sensor... having struggled with the old on being fused to the aluminum pipe... That being said and having been done.... per the check engine light and the code reference on the mfd...? The thought was that once corrected it would "clear " itself. But the light...
  7. Sofla

    Speedster 240 issue HELP PLEASE

    Yes, its the linkage essentially... something like a stuffing box in a boat... The seal for where your shaft exits the bildge and out through the jetdrive and the drivewell outside and in the water. Easily available on any site just verify the fitment. I figured in the worst case scenario...
  8. Sofla

    Horrible sound but not at idle... in gear?

    Ive been reading about the carbon ring and what it can cause symptomatically. In hopes of identifying the same problemic sound i get as the latest issue. Seems to be only in gear.. and once accelerating off the idle speed. I can best describe it as a arbitrary clang ; bang with a notable lack of...
  9. Sofla

    Speedster 240 issue HELP PLEASE

    Ive just learned myself thanks to this site that there is a single componet that does NOT get cooled via the flush hose connection and will suffer from this sort of condition , logically, when run out of the water for more than a few minutes.. 5 i think but by 10to 15 min running ... will cause...
  10. Sofla

    2007 challenger 180 wants to start but ?

    Hello j.... a question please.. when in gear and accelaerate... i get a knock or banging as if im dragging an anchor on a six inch chain! I searched the intake grill and shaft for the obvious obstruction or tangle and saw nothing... Where else could such a sound and feel eminate from? Seems to...
  11. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Thanks. Do you know if such a code.. once corrected, would clear itself? How do i clear the code?
  12. Sofla

    2007 challenger 180 wants to start but ?

    J-... i cant tell you how much I appreciate all the info you certainly sound very informed and ill bet equally capable with all this Save asking you everytime i have a question or hear a hiccup what would you suggest is a quality useful reference for me to look for.. ? Ideally a manual service...
  13. Sofla

    2007 challenger 180 wants to start but ?

    The bellows? Thank you so much for all your attention...i feel ill be on the water in no time.
  14. Sofla

    2007 challenger 180 wants to start but ?

    Wow.... from your info i am not without concern as i ran it on the trailer hosed for longer than that after i got it running after your help with my initial starting issue. In fact at one point i did rev the engines to see how itd be before taking to the water fir its relaunch after dry soo...
  15. Sofla

    2016 gtx limited iS260.... code p2080...? Egt sensor

    Throwing a code that ref. EGT sensor . Not limping just giving the code and check engine light.... went ahead and bought the sensor... but can someone help me out with where exactly the sensor is located and how to get to it as it appears i will need to remove some panels perhaps.?
  16. Sofla

    2007 challenger 180 wants to start but ?

    Soo many thanks for your advice and the details... incredibly helpful folks in here. To jpass.... im sure to start the hose connection once its started... is that not sufficient to be able to run it on the trailer? I had always assumed on any of my boats that it was... please correct me if im...
  17. Sofla

    2007 challenger 180 wants to start but ?

    Thank you.. Beg of you one more question. Once running, one the trailer, there seems to be a rattle coming from in the impeller housing. Im not sure what its supposed to sound like outta the water soo not sure if there is another problem. However. While on trailer if i race the engine , at...
  18. Sofla

    07 challenger 180 Steering cable replacement

    Thanks for your suggestions. I ended up making a deep socket myself. Using an old size appropriate aluminum deck bush pole. Cutoff 18" .enough to get a grip on the end once the far end is seated, to break it loose and unscrew it I took the 22mm nut off my replacement steering cable to use as an...
  19. Sofla

    2007 challenger 180 wants to start but ?

    Thank you for that insight, as i said i did not have to do anything with the gauge, apparently i should definitely be grateful for im hearing. Given your obvious intelligence insofar as seadoo and their mechanics, i wonder of i may beg of you a question regarding a more pointed yet seemingly...
Top